Publicidad
SIZE. Please do not forget that the
helmet interior stretches when
being used. If you hesitate between
two sizes, opt for the tightest one.
ADJUSTMENT OF THE HELMET
To adjust the helmet, place it onto
your head and fasten the chinstrap
without leaving any clearance
between the strap and the chin.
The helmet should be placed on
your head in such a way that it
protects both the forehead and
neck (see image A).
Do not incline the helmet forward
or backward (see image B and C).
TAKE GOOD CARE OF YOUR
HELMET
This helmet has been finished with
a thin paint coating. Just like any
other painted surface, rough
handling or carelessness when
carrying the helmet (like, for
example, having the helmet
fastened together with the lock)
could damage this coating. Do not
throw it against the floor, nor
expose
your
helmet
temperatures higher than 50
degrees centigrades, because,
besides damaging the paint
coating, the level of protection of
your helmet could also decrease.
Do not leave your helmet close to
the
exhaust
pipe
of
motorcycle. If you place your
helmet on the seat of your
motorcycle, please make sure it is
well fastened in order to prevent it
from falling off.
Your helmet is designed to absorb
the energy of an impact by means
of partial destruction of some of its
components. If the helmet has
received a violent impact, it should
immediately be replaced, even
though
the
helmet
undamaged.
REPLACING THE VISOR.
A. Removing.
Loosen the screws on both sides of
the visor. (Fig.1)
Take the visor out . (Fig.2)
B. Placing.
Fasten the screws on both sides of
to
the visor.
your
seems
OWNERS MANUAL
Publicidad
