MarelliMotori MEC-100 Manual De Instrucciones página 83

To configure the MEC-100, that is to enter the desired values for the system parameters, you must:

Connect to the MEC-100 (see Par. 5.3.3).

Enter la password if required (see Par. 5.4.1).

Select the desired group of data (see Fig. 5.5.a).

Click in the field to modify and enter the desired value. Repeat the operation for each parameter to be
configured (see Fig. 5.5.b).

As soon as all parameters into the group are set, click the Apply Current Page button, located under the
configuration area (see Fig. 5.5.c).
Fig. 5.5.a
Selecting the parameter category
5.6. SAVING AND RETRIEVING A SET OF PARAMETERS
The MEC-100 offers the possibility of saving in a file the full set of system parameters to retrieve and load this last later in the
same MEC-100 or in another unit.
5.6.1. Saving a Set of Parameters
To save a full set of system parameters:

Connect to the MEC-100 (see Par. 5.3.3).

Enter the password if required (see Par. 5.4.1).

Configure all the parameters to be set.

Click the Database button in the menu bar of the MEC-100 Interface System (see Fig. 5.6.1.a).

In the displayed pull-down menu, point to the Save Parameter File On-line item and click.

In the File Manager window, select a directory where to save the file, type the file name and click on OK.
5.6.2. Loading a Set of Parameters
To load a full set of system parameters:

Connect to the MEC-100 (see Par. 5.3.3).

Enter the password if required (see Par. 5.4.1).

Click the Database button in the menu bar of the MEC-100 Interface System (see Fig. 5.6.2.a).

In the displayed pull-down menu, point to the Open and Apply Parameter File On-line item and click.

In the File Manager window, select the directory where the file to load is stored, select it and click on OK.
963857137_G
Fig. 5.5.b
Entering the parameter
Fig. 5.6.1.a
Saving the MEC-100 parameters, online
MEC-100
Fig. 5.5.c
Button for data forwarding to MEC-100
83