Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMbLY AND INSTRUCTIONS FOR USE
NOTE: Due to the natural beauty of glazed ceramics, every LILY will have its own unique
coloration.
1. Unpack the product and place on a level surface.
2. Insert the tube into the pump (Fig. 2).
3. Attach the A/C adaptor jack to the base power cord. DO NOT plug into outlet at this
time. (Fig. 3)
4. Fill the ceramic bowl with enough water to ensure the pump is fully submerged (Fig. 4).
5. Plug the cord into 120V household outlet. The switch located on the power cord con-
trols the fountain. If pump doesn't operate, rotate in-line switch once to turn "on" and
once more to turn "off". Monthly maintenance will add to your pump's life.
NOTE: Ensure that the electrical cord loops below the electrical outlet to form a 'Drip
Loop' (Fig. 5). This will prevent water from running down the cord into the electrical
outlet.
Fig. 1
Minimum Water Level
Fig. 2
Flow Control Valve
(+) faster water
output
(-) slower water
output
4
Fig. 3
Attention:
In order to get
best results,
please operate
pump completely
submerged.
Keep the water
level above the
minimum water
level ALL THE
TIME.
Fig. 4
Fig. 5
Drip Loop
5
Publicidad
