Utilization; Basic Use - Chopin Agri-TR Modo De Empleo

EN
Agri-TR
3.

Utilization

After the power-up sequence, the test menu is displayed: it
mentions the name of the grain selected before the last power-off,
and allows by simply pressing the key to start a measurement
cycle.
Test menu

3.1 Basic use

Precautions
Before starting any test cycle, make sure the Agri-TR drawer is
present.
Selecting the calibration
Select the calibration with arrows and directly from the
Test menu.
Test cycle
By mean of the measuring cup supplied, pour in the hopper 1 litre
approx. of grain, and press key .
Excess orifice
Note: The use of the supplied measuring cup is highly recommended, so
as to carry out the test with an optimum grain sample volume, and
therefore to obtain the best accuracy.
An excess orifice prevents any overflowing of the grain
The following screen is then displayed:
User's manual
52
07/2015