RCBS BRASS BOSS 90390 Instrucciones Del Producto página 4

• Never touch the power plug with wet hands, especially when inserting or removing the plug.
• If the unit has fallen in water during operation, do not touch the unit. Remove the power plug from the
socket first.
• Do not spray water or liquid over the device.
• When removing the cord from the socket, grab the power plug, not the cord.
• Protect the power cord from damage.
• If there is damage to the power plug, cord, housing, or other parts of the device, do not use.
• Disassembly of this device should only be performed by qualified professionals at RCBS.
MACHINERY OPERATOR WARNINGS
WARNING: AVOID WEARING LOOSE CLOTHING AND JEWELRY WHICH CAN BE DRAWN INTO
MOVING/ ROTATING COMPONENTS.
KEEP YOUR HANDS AND FINGERS AWAY FROM "DANGER" SPOTS AND PINCH-POINTS WHERE
THEY MIGHT BE INJURED.
KEEP CHILDREN AND OTHERS AWAY FROM MACHINERY.
BE SURE THAT ALL MOVING PARTS ARE SHIELDED AND ALL GUARDS ARE IN PLACE BEFORE
OPERATING ANY EQUIPMENT.
IMPORTANT
BEFORE USING THE RCBS BRASS BOSS HIGH SPEED CASE PREP CENTER, READ THIS INSTRUCTION
MANUAL CAREFULLY TO LEARN HOW TO SAFELY OPERATE THE PRODUCT. LEAVE THE CASE PREP CENTER
UNPLUGGED UNTIL YOU ARE READY TO PROCESS CASES AND HAVE READ THESE INSTRUCTIONS.
WARNING: Failure to properly operate the case prep center may result in personal injury and/or
equipment damage.
If you have read these instructions and still do not understand some operation, call us at 800-379-1762 or
530-533-5191 and a technician will assist you.
This instruction manual contains specific safety and operating information. It should be considered a
permanent part of your reloading equipment, and remain with the equipment at all times for easy reference.
GENERAL
• Use all equipment as the manufacturer recommends. Study the instructions carefully and become
thoroughly familiar with the operation of the product. If you do not have written instructions, request a
copy from the equipment manufacturer.
• Don't take short cuts. Attempting to bypass established procedures is an invitation to an accident.
• Observe "good housekeeping" in the reloading area. Keep tools and components neat, clean and
orderly. Promptly and completely clean up primer and powder spills.
• Reload only when you can give your undivided attention. Do not reload when fatigued or ill, or under
the influence of medication or alcohol. Never smoke while reloading. Develop a reloading routine to
avoid mistakes. Don't rush—load at a leisurely pace.
• Always wear adequate eye protection to protect your eyes from flying particles. You assume unnecessary
risk when reloading without wearing safety glasses.
RECORD KEEPING
Keep complete records of reloads. Apply a descriptive label to each box showing the date produced, and the
reloading components used. Labels for this purpose are packed with SPEER products. Never attempt to guess
at the identity of your reloads.
4