NOTE: Recommended dishwasher location is next to the sink. Make sure there is an
electrical power supply within easy reach of the machine. The power cord is 6-feet
long. The dishwasher must be installed on a solid, level surface. To level the dishwasher,
adjust the four legs under the dishwasher. Carefully position the dishwasher on
the countertop that you determined as your final location. There are two types of
dishwasher installations:
1. Quick Faucet Adapter Connection
2. Permanent Plumbing Installation (requires professional instruction)
NOTE: The suggested way is to install and operate this countertop dishwasher using
the Quick Faucet Adapter Connection.
QUICK FAUCET ADAPTER CONNECTION
①
Drain Hose
1) Drain Port Connection
2) Quick Connect Connection
3) Inlet Port Connection
4) Quick Connect Connection
THE QUICK FAUCET ADAPTER EASILY CONNECTS TO THE SINK FAUCET.
A) First remove aerator from your faucet nozzle and attach the quick connect
threaded adapter to the faucet. The quick connect faucet adapter allows easy
snap-on/snap-off connection to standard (7/8" diameter) faucets.
B) Connect the dishwasher Quick Connect Faucet Adapter to the faucet first to ensure
the hose length fits the dishwasher's selected location. Both hose and fittings
must be connected to the back of the dishwasher. The plastic water intake and
drain fittings are unique to each design and are made to easily fit the dishwasher.
the same water line as the dishwasher. If your sink has a sink spray, it is recommended
that the hose be disconnected and the hole plugged.
②
③
Inlet Hose
5) Faucet Adapter
6) Faucet Washer
7) Pressure Relief Value
8) Faucet Adapter Connection
A hose that attaches to a sink spray can burst if it is installed on
⑤
④
10
⑦
⑧
⑥
⑨
⑩
Quick Connect
9) Locking Collar
10) Inlet Hose Connection
11) Drain Hose Connection
⑪