ENGLISH
TIPS FOR BEST RESULTS
•
Use moderate to slow stroking movements. The use of short circular motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
•
DO NOT press hard against the skin in order to avoid damage to the rotary heads.
CARE FOR YOUR SHAVER
Care for your appliance to ensure a long lasting performance.
We recommend you clean your product after each use.
The easiest and most hygienic way to clean the appliance is by rinsing the appliance head
after use with warm water.
CLEANING
•
Pull the rotary shave face off the hair pocket (Fig. 1 and 2).
•
Tap out excess hair shavings from the hair pocket (Fig. 3). Hair clippings can also be
washed out of the hair pocket and or shave face by rinsing these under the tap.
•
Once dry, snap the shave face back onto the hair pocket (Fig. 4).
CLEANING TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing machine oil.
•
Replacement parts and accessories are available to buy at http://www.remington.co.
uk/ parts-accessories
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing the
battery.
•
Run the shaver until the motor stops.
•
Remove the head from the shaver (pull the head up and off).
•
Using a small screwdriver, pry the 'collar' off of the top of the handle.
•
Using a small screwdriver, pry the front cover from the body.
•
Remove three screws located on front of shaver.
•
Using a small screw driver, pry up the newly unsecured inner housing to expose the
battery.
•
Pry battery free from circuit board.
•
Dispose of battery properly.
6