Remington HC9700 Manual De Instrucciones página 4

ENGLISH
C GETTING STARTED
, CHARGING YOUR APPLIANCE
• It is recommended to fully charge your appliance before using for the first
time.
• Please refer to the charge times shown in this book.
• Ensure the product is switched off.
• The adaptor automatically adjusts to a main voltage between 100V and
240V.
• Connect the product to the adaptor and then to the mains.
, CHARGING VIA CHARGING STAND
• Connect the adaptor to the charge stand and then to the mains.
• Place the charge stand on a flat surface.
• To charge the clipper without the charge stand connect the adaptor to the
power port at the base of the product and then to the mains.
, Charge Level Indicators
• Run time from fully charged is 150 mins.
• Charge time from empty is 4 hours.
, Note: This product can be used corded or cordless.
, Note: To preserve the life of your batteries, let them run out every 6 months
then fully charge.
, Quick charge function (Typical expected run time)
4
Charge Level
Charging
Low Battery
Fully Charged
Charge
5 minutes
10 minutes
30 minutes
60 minutes
120 minutes
Indicator
Red LED will blink slowly
Red LED will blink fast
Red LED will show
Run Time
2.5 minutes
5 minutes
15 minutes
30 minutes
60 minutes