Every Six Months; Battery Removal - Remington HC9700 Manual De Instrucciones

ENGLISH

, EVERY SIX MONTHS

• The blade assembly can be taken apart for deep cleansing.
• Use the provided hex wrench to remove the two blade fasteners.
• The blade will come apart in 3 pieces, that can be wiped and cleaned.
, Spare blade replacement model: Blade SP-HC9700

BATTERY REMOVAL

• The battery is not serviceable.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Push out the blade assembly from the unit.
• Using the hex wrench remove 4 screws from the unit.
• Using a small screwdriver, pry off the top housing.
• Remove the switch assembly.
• Using a small screwdriver remove 6 screws from the top inner housing.
• Open the top inner housing to expose the printed circuit board.
• Cut the wires which connect the motor to the circuit board and expose the
battery.
• Cut the wire tabs which connect the battery to the circuit board and remove
the battery.
• Dispose of the battery safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
8