Trimming Body Hair; After Each Use - Remington PG6045 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
ENGLISH

, Trimming body hair

Attach Body Hair trimmer attachment head.
To achieve the desired hair length, change the guide comb by easily sliding
it onto one of the three slots on the attachment head. The different slots
represent 3mm, 6mm & 9mm hair lengths.
Place the flat top of the trimmer comb against the skin.
Slowly slide the trimmer through the hair, in the direction of hair growth.
Use slow and well-controlled movements.
If hair builds up in the guide comb during the trimming process, switch the
unit off, pull off the guide comb. Brush trimmer / rinse comb.
, Removing body hair
To remove the hairs completely;
Trim the hair down to 1.2mm without attaching the guide comb and then
change to the mini foil attachment head.
Stretch your skin with your free hand so hairs stand upright.
Only apply light pressure on the shaving head whilst shaving.
Shave against hair growth.
C CARE FOR YOUR GROOMER
Care for your product to ensure a long lasting performance. We recommend
that you clean your groomer after each use.
The easiest and the most hygienic way to clean the groomer is by rinsing the
product head after use with warm water.

, AFTER EACH USE

Rinse the accumulated hair from the cutters and shake off excess water.
Alternatively, use a brush.
Gently tap on a flat surface to remove hair particles, and brush the
remaining hairs away.
Place one or two drops of cutter oil or sewing machine oil on the blades.
Turn the clipper on to distribute the oil evenly, wipe off any excess oil.
Wipe the main unit with a damp cloth and dry immediately.
, Note: do not get the groomer handle wet.
Ensure that the groomer is turned off when applying the oil or rinsing under
the tap.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido