Track
Track
Front Side
4. Install the Fixed Panels
Slide the wall frame of the fixed panel over the wall jamb.
Rest the fixed panel on the shower ledge.
NOTE: Perform the procedures below from inside the shower.
Place the tip of a Phillips screwdriver into the hole of the top adjustment block. Using your thumb
and forefinger, turn the adjustment block counterclockwise until the adjustment block firmly
contacts the wall frame.
Repeat the previous step for the bottom adjustment block.
Secure the wall frame to the wall with two #8-18 x 3" flathead screws.
Repeat the procedure for the other side panel.
Verify the side panels are resting firmly against the shower ledge.
1034044-2-B
Wall Frame
Adjustment Block
Wall Jamb
Adjustment Block
Fixed Panel
6
Shower Side
Wall Frame
Shower
Fixed Panel
#8-18 x 3"
Flathead Screw
Sterling