Radio Operation - König Electronic HAV-TR10 Instrucciones

CONNECTION
1. Connect the AC cord to the AC socket and the wall socket. The set is now ready
to use.
2. To switch off the set completely, pull the AC cord off the wall socket.

RADIO OPERATION

1. Rotate the Volume Knob clockwise to turn the radio on and adjust to desired
sound level. The unit is turned on and the Power Indicator will light up.
2. Slide the Band Switch into the band which you want to be broadcasted.
3. You may connect headphones with a 3.5 mm plug to the Earphone Jack. Do not
play your headphones at a high volume that can damage the hearing.
4. Adjust the antenna. (Refer to "Antennas" )
5. Rotate the Tuning Knob to tune in your favorite station. When the
broadcast is strong, the tuning indicator will light up.
6. After use, rotate the Volume Knob anti-clockwise to turn the radio off till a "click"
is heard.
NOTES:
When the broadcast is weak or the batteries have been exhausted, the Tuning
Indicator may not light up even if the sound is still audible through the speaker.
Antennas
FM:
Pull out the Telescopic Antenna and adjust its length and angle for
optimum reception.
AM:
The sensitive ferrite care antenna inside the set will provide
excellent AM reception in most areas for optimum reception, turn
the set in the direction which gives the best results since the ferrite
care antenna is directional.