Wacom STU-300B Guía De Arranque Rápido página 6

Specification
Model STU-300B
Dimensions (W x D x H)
Weight
Operating Condition
Storage Condition
Interface Cables
Power Consumption
DISPLAY
Display Panel
Number of pixels
Screen Size
LCD quality
TABLET
Technology
Active Area
Resolution
Accuracy
Reading Height
Maximum Report Rate
Pressure levels
Communication Interface
Pen: UP-610-88A-1
Physical size (L x Diam.)
Weight
Pen tip travel
Pen tether hole
6
STU-300B.indb 6
156.0 x 127.4 x 16.9 mm
(Protruding parts not included)
** kg (excluding the cable)
5 to 40 degrees C, Humidity: 30% to 80% RH
(non-condensing)
- 20 to 60 degree C, Humidity: 30% to 90% RH
(non-condensing)
USB type A to mini B
Less than ** W
Monochrome FSTN/Reflective mode
396 x 100
4 inch (98.985 x 24.985 mm)
Each LCD panel is produced under very stringent
quality standards. Production techniques cannot
guarantee an absolutely perfect TFT display. Wacom
does not allow any pixel to be always white or always
black. A small number of pixels are allowed to show a
wrong color for some parts of the color spectrum. This
does not mean the display is defective.
Electro magnetic resonance technology
98.985 x 24.985 mm
2540 lpi or 0.01 mm/pt
± 0.5 mm (center), the edge area 1 (20 mm wide from
edge of display area) to be ± 2.0 mm, the edge area 2
(3 mm wide from edge of display area) to be ± 4.0 mm
5 mm or more (Center)
200 points/sec
512 levels
USB
140.5 x 9.0 mm (5.53 x 0.35 in)
7 g (0.25 oz), approximately
0.2 mm (0.04 in) approximately
yes
24.03.2016 16:12:13