Headset Adjustment - Orbea BLUE PAPER ORDU Technical Manual

22 | ORBEA

HEADSET ADJUSTMENT

3
2
2 N.m
4
3
6 N.m
Always follow the recommended
torque settings.
TECHNICAL MANUAL
3
1
4 N.m
HEADSET ADJUSTMENT.
AFTER FORK ASSEMBLY
stem from turning when adjusting the headset.
2. Adjust the headset preload bolt until there is no play in
the headset and it turns smoothly.
3. Fix the stem to the preload ring.
BLUE PAPER ORDU · OMX 2021
1
5
3
2
4
Always follow the recommended
torque settings.
1.5
0.5 N.m
REGULAR HEADSET ADJUSTMENT
1. Remove the stem cover to access the headset adjust-
ment bolts.
3. Adjust the headset preload bolt until there is not play in
the headset and it turns smoothly.
5. Install the stem bover.
ORBEA | 23
EN