Kärcher MIC D Manual Del Usuario página 105

10.4.15 Greasing the vehicle
10.4.14.3 Replacing the dust filter behind the driver
seat
1 Driver seat
2 Dust filter
3 Circulating air lever
Push the driver seat all the way to the front.

Pull out the dust filter and replace by a new one.

Lubrication point
1 Central lubricating strip
for pivot bearing and lifting cyl-
inder of the power lift and for
front bearing of the steering cyl-
inder
2 Articulated steering in centre of
vehicle
3 Steering cylinder
4 Lower bearing articulated joint 1
5 Lifting cylinder
6 Lift platform
7 Drive pedal
8 Reversing lever brake pedal
ATTENTION
Risk of functional disturbances. Do not let the V-belts get
in contact with the grease.
Grease the grease nipples in accordance with the lubri-

cation intervals (table) using a grease gun.
Use high quality multi-purpose grease and use grease

gun to lubricate.
48
-
EN
Number Lubrica-
of lubri- tion in-
cation terval
points
1 every 8 h
2 every 8 h
2 every 8 h
every 8 h
4 every
25 h
2 every 8 h
1 every
100 h
1 every
100 h
105