10.6 Replacement Tasks - Kärcher MIC D Manual Del Usuario

10.6 Replacement tasks

10.6.1 Fuses
10.6.1.1 Assignment of the fuses and relays
1 Clamping lever
2 Cover
The fuses are located on a board behind the cover on the
right hand side of the driver's cabin.
Open the right door of the driver's cabin.

Open 3 clamping levers.

Open the cover.

1 Printed board
2 Fuse tester
Only works when the main switch is switched on
3 LED green
Pull out the allegedly defective fuse.

Check the fuse in the fuse tester:

Insert the fuse in the fuse tester. If the fuse is OK, the
LED is green. If the fuse is defective, the LED is not on.
Replace defective fuses.

ATTENTION
Only use fuses with identical safety ratings.
50
-
EN 107