Prepare For Use - auna Belle Epoque 1912 Manual Del Usuario

EN
28

PREPARE FOR USE

Carefully remove the unit from the carton and remove all packing material
from the unit.
• Unwind the AC power cord and extend it to its full length.
• Unwind the FM Antenna wire and extend to it to its full length.
• Raise the lid to expose the turntable. The turntable has been secured for
shipment with a transit screw. Use a coin or a Iscrewdriver to turn the
transit screw clockwise. This will allow the turntable to "float".
• Remove the opaque white plastic stylus cover from the phonograph
stylus by sliding it in the direction of the arrow.
• Please pay attention to the stylus during operation because stylus
damage is not covered by the warranty.
• Remove the the twist-tie that was used to secure the tone arm during
shipment.
• Release the tone arm lock lever.