Kohler K-10332 Manual Del Usuario página 5

Plastic Cap
Lift Rod
Stopper
Thumbscrew
Stopper Bolt
Flange
Link
Rod Nut
Drain Body
Clip
Seal
Rod
Body Nut
Tailpiece
2. Install the Drain
Remove the plastic cap from the drain assembly.
Remove the stopper from the flange.
Remove the flange from the drain body.
Thread the body nut down the drain body.
Slide the seal down to the body nut.
From underneath the lavatory, insert the drain body through the
drain hole.
Apply plumbers putty to the underside of the flange.
Thread the flange onto the top of the drain body.
Thread the body nut up the drain body until the seal is
compressed against the underside of the lavatory.
Wipe away any excess plumbers putty from around the flange.
Remove the rod nut from the drain body.
Remove the clip from the rod.
Kohler Co. 5 1048639-2-C