Overload Protection; Current Output Indicator - GENERGY TENERIFE 7500W Instrucciones De Uso

8.3 Overload protection.

The generator is equipped with circuit breakers that cut the electrical current
output in case of an overload or short circuit. According to the figure below, these
are:
• Digital control (1): Protects in case of total overload.
• Direct Current (2): DC circuit of the generator.
• 32A circuit breaker (3): Protects 32A socket.
• 16A circuit breaker (4): Protects 16A socket.
The digital control protection (1) cuts off the current output in case of a total
overload. To restore the current output: turn off the generator, reduce the load and
restart the generator.
Circuit breakers 2-4 are pulse switch type and are armed by pressure. The circuit
breaker 3 is a toggle switch type, which is armed moving up the lever.
NOTE: If you see that the generator cannot supply the power consumption of
the equipment connected or does not accept it, please do not insist. Continuous
overloads can damage the generator.

8.4 Current output indicator.

The current output indicator "OUTPUT INDICATOR" has as unique purpose to
show that the 230V output is normal and correct.
54