Use Of The 230V De Ac Outlet; Overload Protection In 230V Output - GENERGY ISASA Instrucciones De Uso

6.2 Use of the 230V de AC outlet.

NOTE: Check that no devices are plugged into the generator, unplug
everything before starting the engine.
Start up the engine and verify that the 220/240V output is marked in voltmeter.
Now you can plug your devices.
To be a generator with capacitor regulated by capacitor voltage
somewhat high and will correct when connect some load
NOTE: Generator has not AVR and is not suitable for sensitive electronic
equipment.
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output (600w).
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.

6.3 Overload protection in 230V output.

In case of overload or short circuit, the protection thermal breaker for overloads
will go from the "OFF" position, disconnecting voltage output.
In case of overload, first unplug any unplugged equipments.
VOLTMETER
14
may be