Switching The Feature Demo; Switching The Reverse Mode; Switching The Ever Scroll - Pioneer DEH-P7750MP Manual De Operación

Initial Settings
1 Use Multi-Control to select Mute.
Mute appears in the display.
2 Press Multi-Control to switch the tele-
phone muting/attenuation.
Pressing Multi-Control will switch between
TEL ATT (attenuation) and TEL mute (muting)
and that status will be displayed.

Switching the feature demo

The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
1 Use Multi-Control to select
Demonstration.
Demonstration appears in the display.
2 Press Multi-Control to turn the feature
demo on.
ON appears in the display.
# To turn the feature demo off, press
Multi-Control again.
Notes
! Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
! You can also turn on or off feature demo by
pressing button 6 while this unit is turned off.
For more details, see Feature demo on page
7.

Switching the reverse mode

If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds.
1 Use Multi-Control to select
Reverse mode.
Reverse mode appears in the display.
2 Press Multi-Control to turn the reverse
mode on.
ON appears in the display.
# To turn the reverse mode off, press
Multi-Control again.
Note
You can also turn on or off reverse mode by press-
ing button 5 while this unit is turned off. For more
details, see Reverse mode on page 7.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Use Multi-Control to select Ever-scroll.
Ever-scroll appears in the display.
2 Press Multi-Control to turn the Ever
Scroll on.
ON appears in the display.
# To turn the Ever Scroll off, press
Multi-Control again.
Section
11
51
En