Baby Lock BNCW Guia De Instalacion página 10

INSTALLING THE CUTWORK EMBROIDERY UPGRADE FOR MULTI-NEEDLE MACHINES
e
Carefully read the information that appears,
and then click "Next".
f
Download the latest upgrade program.
Confirm the model of your machine, click
"Download", then save the upgrade program
(************.upf) to your computer. Click "Next".
Note
• If the displayed version or later has already
been installed in the machine (see step
on page 7), click "Next" to continue with the
procedure without downloading the latest
file. Follow step
Upgrading the Machine" on page 9, then
start the procedure from "[Step 3] Certifying
the Upgrade" on page 12.
g
Download the manual.
Select your preferred language and click "Download"
to save the file to your computer, then click "Next".
8
a
l
, and skip "[Step 2]
h
Type in the 15-digit CD key found on the
label attached to the CD-ROM envelope of
the upgrade kit, and then click "Next".
Note
• Type in the CD key on the label attached to
the CD-ROM envelope for machines. The
product ID on the label attached to the CD-
ROM case for Palette cannot be used.
If an error message appears
Check below list for possible entry error(s). To close
the message, click "OK".
• Are symbols or characters other than letters and
numbers entered?
• Has the uppercase letter "I" been entered in place
of the number "1"?
• Has the uppercase letter "O" been entered in place
of the number "0"?
Memo
• The uppercase letter "O" and "I" are not
used in the CD Key. Also, no symbols are
used in the CD key.
i
Type in the internal machine identification
number (No.) written down in step
then click "Next".
If an error message appears
Check that symbols or characters other than numbers
have not been entered. To close the message, click
"OK".
a , and