Baby Lock BNCW Guia De Instalacion página 15

INSTALLING THE CUTWORK EMBROIDERY UPGRADE FOR MULTI-NEEDLE MACHINES
e
Type in the 8-digit Certification Key written
down in step k of "[Step 1] Obtaining the
Certification Key" (page 9), and then press
.
f
Certification has been completed when the
following screen appears. Turn off the
embroidery machine and then turn on
again.
Note
• If the following screen appears, type in the
10-digit number that appears beside "No." at
the bottom of the screen (in step
then repeat steps
"Obtaining the Certification Key" (page 7-9)
to obtain the Certification Key.
• If the Certification Key is lost, repeat
b
steps through
Certification Key" (page 7-9) to attain the
Certification Key.
g
Confirm that there is a check mark beside
"KIT CW" in the Settings screen.
c
), and
b l
through of
l
of "Obtaining the
13