Baby Lock BNCW Guia De Instalacion página 9

INSTALLING THE CUTWORK EMBROIDERY UPGRADE FOR MULTI-NEEDLE MACHINES
[Step 1] Obtaining the
Certification Key
The following procedure describes how to obtain
the Certification Key necessary for upgrading.
a
Make a note of the 10-digit internal
machine identification number displayed
beside the "No." along with the version
number, as shown on page 5 or 6 of the
Setting screen depending on your machine
model.
a Internal machine identification number (No.)
b Version number
Note
• The internal machine identification number
that appears beside "No." is different from
the machine serial number (SER. NO.)
located on the label attached to the back of
the embroidery machine.
• Make sure the internal machine
identification number (No.) is recorded
accurately as these numbers need to be
entered within the Certification Key Issuing
Wizard in order to obtain the Certification
Key.
• The number of pages in the Settings screen
may differ depending on the version or
machine model.
b
Insert the CD-ROM (for machines) into the
computer's CD-ROM drive.
Memo
• In Windows
"AutoPlay" dialog box appears, click
"Open folder to view files".
c
Open the designated drive for your CD-
ROM (usually the "D" drive) on the
computer ("Computer" ("My Computer")),
double-click
Key Issuing Wizard".
→ The "Select Language" dialog box automatically
a
appears.
b
d
Select the desired language, and then click
"OK".
→ "KIT CW Certification Key Issuing Wizard"
appears.
Note
• Should you fail to access the Web site to
download the latest program, an error
message appears and the wizard is
terminated. In this case, restart the wizard
after making a secure internet connection.
® ®
7 or Windows Vista , when the
to start the "Certification
7