Fellowes Pulsar e 300 Manual Del Usuario página 4

ENGLISH
BEFORE YOU BIND
1
1. Check the green power neon
is on.
4
4. Pull comb-opening lever forward
to open the comb.
STEPS TO BIND
1
1. Ensure edge guide is set to the
proper document size. Punch front
and back covers first.
4
2
2. Select the correct comb
diameter using the comb
storage tray.
5
5. Test punch scrap sheets to check
edge guide setting.
2
Front
30
Cover
Max 15
30
(75 gsm)
(20 lb)
30
Back
Cover
2. Punch sheets in small batches
that do not overload the machine
or the user. Adjust edge guide, if
necessary.
3
3. Insert the plastic comb into the
opening mechanism.
3
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.