Tabla de contenido
Publicidad
USER MANUAL
TEF 2780 LED Decklight
BlueLine Series
4.2 Installation guide
•
Make sure the 4 pcs M4 screws on top
of the mounting brackets is unscrewed
to allow the lamphousing to slip in
underneath. Place the lamphousing
inside the mounting bracket. The
mounting brackets should fit into the
blue groove on the lamp housing. See
figure 7 & 8.
•
After placing the lamp in the correct
position be sure to tighten the 4 pcs M4
screws on the top to secure the lamp
from falling. See figure 6 & 8.
Figure 7
Page 6
M4 screw
Figure 8
Figure 6
Publicidad
Tabla de contenido
