Loading The Dryer; Check The Lint Filter Before Every Load - KENMORE ELITE 796.6141 Serie Manual De Uso Y Cuidado

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
indudlng the important Safety instructions, before operating this dryer.
SORTING LOADS
Fabric Care Labels
Most articles of clothing feature fabric care labels that
include instructions for proper care.
Tumble [_ J_ D
dry
Dry Normal Permanent Press/
wrinkle resistant
Heat
setting
Gentle/ Do not Do not dry
delicate tumble dry (used with do
not wash)
@ ® ® ®
High Medium Low No heat/air
Group Similar items
For best results, sort clothes into loads that can be dried
with the same drying cycle.
Different fabrics have different care requirements, and
some fabrics will dry more quickly than others. For best
fabric care results, always dry fabrics with similar care
requirements together.
LOADING THE DRYER
AnWARNING:
To reduce the risk of fire,
electric shock, or injury to persons when using this
appliance, follow basic precautions, including the
following:
• Check all pockets to make sure that they are empty.
Items such as clips, pens, coins, and keys can damage
both your dryer and your clothes. Flammable objects
such as lighters or matches could ignite, causing a fire.
Failure to do so can result in fire, explosion, or death.
• Never dry clothes that have been exposed to oil,
gasoline, or other flammable substances. Washing
clothes will not completely remove oil residues. Failure
to obey this warning can result in fire, explosion,
or death.
Loading Tips
• Combine large and small items in the same load.
• Damp clothes will expand as they dry. Do not overload
the dryer; clothes require room to tumble and
dry properly.
• Close zippers, hooks, and drawstrings to prevent these
items from snagging or tangling on other clothes.
CHECK THE LiNT FILTER BEFORE EVERY LOAD
Every time the dryer is turned on, the CHECK FILTER
light will blink as a reminder to make sure the filter is
clean. Always make sure the tint filter is clean before
starting a new toad; a clogged tint filter will increase
drying times. To clean, pull the lint filter straight up and
roll any tint off the filter with your fingers. Do not rinse
or wash the filter to remove lint. Push the lint filter firmly
back into place.
Always ensure the lint filter is properly installed before
running the dryer. Running the dryer with a loose or
missing tint filter may damage the dryer and articles in
the dryer.
Lint
Filter
23