SAFETY iNSTRUCTiONS
FOR CONNECTING
ELECTRiCiTY
WARN
i N G:
To reduce the risk of fire, electric shack, or injury to persons when using this appliance,
fallow
basic precautions, indudlng the faHawlng:
* Do nat, under any circumstances, cut or remove
the ground
prong from the power card. To prevent
personal injury or damage
to the dryer, the electrical
power cord must be plugged
into a properly
grounded
outlet.
* Far personal safety, this dryer must be properly
grounded.
Failure to do so can result in electrical
shock or injury.
* Refer to the installation instructions in this manual
far specific electrical requirements far your madek
Failure to fotlow these instructions
can create an
electrical
shock hazard and/or
a fire hazard.
* This dryer must be plugged into a property grounded
auHet. Electrical shock can result if the dryer is nat
properly grounded. Have the wall outlet and circuit
checked by a qualified electrician to make sure the
outlet is properly grounded.
Failure to follow these
instructions can create an electrical
shock hazard
and/or
a fire hazard.
* The dryer should always
be plugged into its own
indlvidual electrlcal outlet which
has a voltage
rating
that matches the rating plate. This provides the best
performance
and also prevents overloading house
wiring
circuits which could cause a fire hazard
from
overheated wires.
Never unplug your dryer by pulling an the power
cord. Always grip the plug firmly and pull straight
out from the outlet. The power cord can be damaged,
resulting in a risk of fire and electrical
shock.
Repair or replace immedlatelv
aft power cords that
have became frayed
or otherwise damaged.
Do nat
use a cord that shows cracks or abrasion damage
along its length or at either end. The power cord can
melt, creating
electrical
shock and/or
fire hazard.
When instafflng or moving the dryer, be careful nat
to pinch, crush, or damage
the power cord. This witl
prevent injury and prevent damage
to the dryer from
fire and electrical
shock.
SAVE THESE INSTRUCTIONS