Operating Mode - Brita PURITY Quell ST Manual

Error level E2 indicates whether and from when until when an error has occurred at the outlet water
meter. Display is similar to level E1.
Program Overview
20 sec. no activity
Retrieval mode
ID-Information
00 Current level
-1 History level 1
-2 History level 2
-3 History level 3
-4 History level 4
E1 Error inlet metre
E2 Error drainage metre
10 Troubleshooting
10.1 No water flow
Cause: Water intake closed.
Troubleshooting: Open water intake on the upstream stop valve or inlet valve
Caution: Installation and maintenance of the filter system may be carried out only by specialist staff.
!
10.2 No or low water flow in spite of open water intake
Cause: Mains pressure too low.
Troubleshooting: Check mains pressure.
If the fault continues in spite of adequate mains pressure, check the filter
system and filter cartridge and change if necessary.
!
Operating and Safety Information (Chapter 3).

Operating mode

Carbonate hardness • Ca-
pacity • By-pass • last filter
change date
1 x button
Caution: Prior to changing, read the Technical Data (Chapter 12) and the
30 sec.no activity =
no Parameter acceptance
Press button 4 seconds
Parameterisation
Filter system type and size
Type of hardness (unit)
and value
Monthly limit
RESET
Parameter acceptance
2 sec.
2 sec.
2 sec.
2 sec.
on inlet hose .
7 6
33
EN