STEERING LOCK
The motorcycle is equipped with a steering lock
(1) on the right side of the steering head tube.
Lock the steering as follows:
-Turn the handlebar to the left;
-Insert the key into the lock and turn it
counterclockwise;
- Push it inside and, if necessary, turn the
handlebar in both directions;
- Turn the key clockwise and remove it from the
lock.
To unlock the steering, follow the above
procedure in reverse order
.WARNING
Do not turn the handlebar with the key into the
steering lock, to avoid breaking it.
SADDLE REMOVAL
To access to some components it is necessary to
remove the saddle by working as follows:
- Turn the fixing pin (1) anticlockwise in order to
release the saddle (2) from the locking position.
- Lift the saddle from the rear part (A) and
release it from the locking positions by pulling it
towards the motorcycle rear part (B).
SM125
21 / EN