Publicidad
Idiomas disponibles
Idiomas disponibles
INsTAll TONGue.
Join the tongue with the mast
aligning the holes as shown.
If yOuR vehIcle's hITch Is 1 1/4":
ReMOve The 2" hITch AdAPTeR.
fOR 2" hITches: PROceed
TO NexT sTeP.
TIGhTeN lOckING kNOb.
NOTE: Lock must be in unlocked
position to tighten or loosen knob.
Remove dirt guard.
•
• Turn key clockwise to unlock.
1033556D-2/15
Remove the screw from
the adapter using the
small hex wrench.
Remove the adapter
from the tongue.
secuRe TONGue.
• Install bolt and a flat
washer.
• Add a second washer,
attach nut.
• Use the large hex
wrench and closed
wrench to tighten
completely.
INseRT TONGue INTO
vehIcle's hITch.
IF SPARE TIRE CAUSES
INTERFERENCE, DO NOT
USE THIS PRODUCT!
Align the holes in the receiver
to the holes in the tongue.
Safety pin
is required
for use.
• Insert safety pin.
• TIGHTEN knob until there
is no more play between
the tongue and receiver.
• Lock it.
• Replace dirt guard.
NOTE: When
locked, the knob
will spin freely,
making it unable
to be loosened.
Publicidad
