Installation Warnings - GE MGI09CAB3 Manual De Uso Y Cuidado

WARNINGS:
• READ ALL SAFETY PRECAUTIONS BEFORE INSTALLATION.
• INCORRECT INSTALLATION DUE TO IGNORING INSTRUCTIONS
CAN CAUSE SERIOUS DAMAGE OR INJURY

Installation Warnings

• Ask an authorized dealer to install this air
conditioner. Inappropriate installation may
cause water leakage, electric shock, or fire.
Warnings for product use
• If an abnormal situation arises (like a burn-
ing smell), immediately turn off the unit and
pull the power plug. Call your dealer for in-
structions to avoid electric shock, fire or in-
jury
• Do not insert fingers, rods or other objects
into the air inlets or outlets. This may cause
injury, since the fan may be rotating at
high speeds.
• Do not use flammable sprays such as hair
spray, lacquer or paint near the unit. This
may cause fire or combustion.
• Do not operate the air conditioner in places
near or around combustible gases. Emitted
gas may collect around the unit and cause
explosion.
Electrical Warnings
• Use only the specified power cord. If the
power cord is damaged, it must be re-
placed by the manufacturer or certified
service agent.
• Keep power plug clean. Remove any dust
or grime that accumulates on or around
the plug. Dirty plugs can cause fire or elec-
tric shock.
66
• All repairs, maintenance and relocation of
this unit must be performed by an autho-
rized service technician. Inappropriate re-
pairs can lead to serious injury or product
failure.
• Do not operate the air conditioner in a wet
room (e.g., bathroom or laundry room). This
can cause electrical shock and cause the
product to deteriorate.
• Do not expose your body directly to cool
air for a prolonged period of time.
• Do not pull power cord to unplug unit. Hold
the plug firmly and pull it out from the out-
let. Pulling directly the cord can damage it,
which can lead to fire or electric shock.
• Do not use an extension cord, manually ex-
tend the power cord, or connect other ap-
pliances to the same outlet as the air con-
ditioner. Poor electrical connections, poor
insulation, and insufficient voltage can
cause fire.