Important; Other Features; Setting The Angle Of Air Flow - GE MGI09CAB3 Manual De Uso Y Cuidado

IMPORTANT: For a detailed explanation of each function, refer to the remote con-
trol section.

Other Features

• Auto-Restart
If the unit loses power, it will automatically
restart using the previous settings once
power has been restored.
• Anti-mildew (some models)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner
will continue to operate at a very low
power setting in order to dry up the con-
densed water and prevent mildew growth.
For a detailed explanation of your unit's advanced features (such as TURBO mode and the
self-cleaning functions), refer to the remote control section.
NOTE ON ILLUSTRATIONS
Illustrations in this manual are for explanatory purposes. The actual shape of your indoor
unit may be slightly different. The actual shape shall prevail.

Setting the Angle of Air Flow

Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT
button to set the direction (vertical angle) of
airflow.
1. Press the SWING/DIRECT button once to
activate the louver. Each time you press
the button, it will adjust the louver by 6°.
Press the button until the direction you
prefer is reached.
2. To make the louver swing up and down
continuously, press and hold the SWING/
DIRECT button for 3 seconds. Press it
again to stop the automatic function.
70
• Wi-Fi Control (some models)
Wi-Fi control allows you to control your air
conditioner using your mobile phone and a
Wi-Fi connection.
• Louver Angle Memory (some models)
When turning on your unit, the louver will
automatically resume its former angle.
• Refrigerant Leakage Detection (some
models)
The indoor unit will display "EC" when it de-
tects a refrigerant leakage.
Range
CAUTION: Do not keep the
louver a too vertical angle
for long periods of tie. This
can cause water from
condensation to drip on
furniture.
Fig. 2.2