Poweredge™ Blades - Dell™ Openmanage™ Version Requirements - Dell PowerEdge M905 Actualización De Información

Blade 8
Integrated LOM1 Port 8
Integrated LOM2 Port 16
Mezz1_Fab_C
Mezz2_Fab_B
Mezz3_Fab_C
Mezz4_Fab_B
Blade 6
Integrated LOM1 Port 6
Integrated LOM2 Port 14
Mezz1_Fab_C
Mezz2_Fab_B
Mezz3_Fab_C
Mezz4_Fab_B
PowerEdge™ Blades — Dell™ OpenManage™
Version Requirements
The PowerEdge M905 and M805 blades require OpenManage systems
management software version 5.4.3 or later.
NOTE:
OpenManage version 5.4.3 does not support PowerEdge M600 or
M605 blades.
The PowerEdge M610 and M710 blades require OpenManage systems
management software version 6.0.1 or later.
NOTE:
OpenManage version 6.0.1 does not support PowerEdge M600, M605, M805,
or M905 blades.
10
Information Update
A1 B1
Port 8
Port 16
A1 B1
Port 6
Port 14
I/O Module
C1 C2
Port 8 Port 8
Port 16 Port 16
I/O Module
C1 C2
Port 6 Port 6
Port 14 Port 14
B2 A2
Port 8
Port 16
Port 8
Port 16
B2 A2
Port 6
Port 14
Port 6
Port 14