Charging The Battery - SCHUBERTH SRC SYSTEM PRO Guía De Usario

Microphone
Flexible Boom
Pin
Antenna
USB Connector
Connector
• Charging Jack
• Software Download Port
Wall charger plug
USB adapter cable
Velcro® pads
|
SRCS Pro
6
2 Speakers
Pin
Intercom
Voice Command
• On / Off
Music and Mobile
Volume Up
Volume Down
Speaker Connector
Microphone sponge
Speaker pads
User Manual, stickers

2. CHARGING THE BATTERY

Make sure that your SRC-System™ PRO is fully charged for at least 4 hours
before initial use.
1. Open the cover protecting the Charging Jack.
2. Insert the USB cable into the Charging Jack.
3. Insert the other end of the USB cable into the wall
charger or a computer's USB port.
4. While charging, the red LED turns on. When
charging is complete, the red LED will turn off.
Your wall charger and USB adaptor cable serve two purposes:
1. Charging your headset from any A/C wall socket or from a USB port on your
computer (charging time from computer takes longer)
2. Downloading software upgrades from any PC / Mac (see section 4 for details).
The cover protecting the micro USB Connector should be kept tightly closed at all times to
prevent moisture from entering the device.
Battery
In Standby, press and
Check
• BLUE = Full • PURPLE = Half
for 5 seconds.
• RED = Almost empty