NZI Helmets STREET TRACK Manual De Instrucciones página 5

O W N E R S M A N U A L
VISOR
Instructions for taking care of your visor:
Clean the visor only with water and neutral
soap. To dry the visor it is not necessary to
rub; dabbing will do. We strongly recommend
you to avoid the use of any kind of solvents,
alcohol or abrasive products on the visor. It
is recommended to replace the visor when
scratches or marks appear during the use;
they can impair your view.
Replacing the visor.
Removing:
Unscrew the screw of the visor with a flat-
head screwdriver or a five-cent coin. [Fig. 1 ]. Re-
peat this step on the opposite site of the visor.
Placing:
Place the washer [item 1] on the helmet shell
[Fig.2]. Position the visor in order to meet the
axes. Screw the visor with a flat-head screw-
driver or a five-cent coin. Repeat this step on
the opposite site of the visor.
REFLECTIVE STICKERS
The re ective stickers should be glued in
the places indicated before the rst use
of the helmet ( g. 3).
STREET TRACK
2
1
5