Inserting The Battery And Memory Card - Canon PowerShot SX500 IS Guía De Inicio

Initial Preparations

Inserting the Battery and Memory Card

Terminals Battery
Lock
4
z z
For details on charging time and the
number of shots or recording time
available with a fully charged battery,
refer to "Specifications" in the Camera
User Guide.
1
Open the cover.
z z Slide the cover ( ) and open it ( ).
2
Insert the battery.
z z While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z z
To remove the battery, press the battery
lock in the direction of the arrow.
3
Check the card's write-protect
tab and insert the memory card.
z z Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
z z Insert the memory card facing as shown
until it clicks into the locked position.
Label
z z To remove the memory card, push it in
until you feel a click, and then slowly
release it.