Powering On And Off - Zagg auto-fit 7 Manual Del Usuario

USING THE KICKSTAND: APPLIES TO 7" VERSION ONLY
The Auto-Fit features a convenient kickstand for
added security. To use the kickstand, simply lift it
out from the back of the Auto-Fit's cover.
When you're done using the kickstand, press it back
into the Auto-Fit. A magnet will secure the kickstand in
place until you are ready to use it again.

POWERING ON AND OFF

To turn your Auto-Fit on, move the POWER
switch to the ON position. A blue LED will
illuminate briefly while the keyboard powers
on. To turn your Auto-Fit off, slide the POWER
switch to the OFF position.
SELECTING YOUR OPERATING SYSTEM
The ZAGG Auto-Fit works with both Android and Windows operating
systems and can easily alternate between the two. You must select the
correct operating system before your Auto-Fit will pair with your device. To
choose the appropriate operating system, follow the instructions below. The
default keyboard operating system is Android, so if you have an Android
tablet proceed to "Pairing Your ZAGG Auto-Fit".
FOR WINDOWS
1. Make sure your Auto-Fit keyboard is turned on.
2. Press the PAIR button (a blue LED on the right of the keyboard will
begin flashing).
3. While the blue LED is flashing, press fn + W.
4. Continue the pairing process as described in the "Pairing Your ZAGG
Auto-Fit" section.
On
Off
3