Metra 99-7631B Instrucciones De Instalación página 3

4. Unclip and remove the (2) side
trim panels at the front of the
center console, and then remove
the (1) Phillips screw exposed
behind each panel. Tip: Pull out on
the front sides of the console to
release for later steps. (Figure E)
5. Slide both of the front seats
forward and then remove the (2)
12mm bolts from the rear sides of
the center console. Slide the seat
back once done. (Figure F)
6. Unclip and remove either the front
console pocket or heated seat
controls, depending on options
available. (Figure G)
Continued on next page
Dash Disassembly
(Figure E)
99-7631B
(Figure F)
3
(Figure G)