Metra 99-7631B Instrucciones De Instalación página 4

7. Unclip and remove the trim panel
where the center console and the
dashboard meet, and then remove
the (2) Phillips screws exposed.
(Figure H)
8. Slide the center console back, and
then unclip and remove the vent
panels from each side of the radio/
climate control panel. (Figure I)
9. Remove the (2) Phillips screws
securing the accessory panel
below the climate control panel,
and then unclip and remove.
(Figure J)
Continued on next page
Dash Disassembly
(Figure H)
99-7631B
(Figure I)
4
(Figure J)