Yakima BuckHorn 4 Manual De Instrucciones página 2

INSTALL MAST TO HITCH.
Align the holes in the hitch to the
holes in the carrier.
Set arm
assembly onto
mast.
Attach a strap to each seat
tube and cradle.
1033286B-2/12
ALIGN HOLES IN MAST AND ARM ASSEMBLY POST.
• Insert long nuts into hex
openings at back of
mast.
• Attach bolts and
washers.
• Tighten with Allen
wrench.
LOAD
BIKES.
INSERT hitch bolt and
washer from RIGHT TO LEFT.
TIGHTEN.
Match the seat tube to
the stabilizing cradle.
SECURE hitch bolt
with safety clip.
PULL THE RUBBER
STRAPS SECURELY
OVER THE TUBES.