Descargar Imprimir esta página

Ergotron LX Wall Mount Keyboard Arm Manual De Instrucciones

Publicidad

Enlaces rápidos

1
WARNING:
Ensure that the wall structure is capable of supporting four times the total weight of mounted
equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, un-
safe condition which could lead to personal injury and/or property damage. Consult a construction
professional if you have any doubt about what this means in regard to your particular application.
CAUTION: Make sure the wall mount bracket is level, fl ush and snug to the wall surface. DO NOT
OVERTIGHTEN THE BOLTS.
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over time. Inspect mounting
solution for loose fasteners on a routine basis. If desired, apply a light duty thread locking adhesive to fasteners before
installation to prevent back-out.
NOTE: Wall Track and Brackets sold separately.
Guía y soporte de pared Vendido por separado
Montant mural et fi xation Vendu séparément
Alu-Profi lschiene und Bügel Separat erhältlich
Muurrail en -beugel Apart leverbaar
Wall Track e staff a Venduta separatamente
4x
ウォールトラックおよびブラケット別売
墙轨和托架单独出售。
10-24 x 1/2"
벽 트랙 및 브래킷 별도 판매
1/8"
4x
10-24 x 1/2"
Wood
Ø 3/16" (5 mm)
Madera
Bois
Solide Holzbalkenträger
Massief Houten Pilaren
Due montanti in legno massiccio
木质
나무
M8 x 80mm
4"
2"
(102mm)
(51mm)
For more information on this product or installation visit:
www.ergotron.com
888-45-154-W-02 rev. D • 06/10
LX Wall Mount Keyboard Arm
1.125"
(28.6mm)
6"
(152mm)
4.1"
(104mm)
33"
(838 mm)
To Floor
Concrete
Ø 3/8" (10 mm)
Concreto
Béton
Massivbeton
Beton
M8 x 80mm
Cemento
コンクリート
水泥质
콘크리트
≤5/8"
(≤16mm)
≥4"
(≥102mm)
3-1/8"
(80 mm)
WARNING:
Mounting holes must be at least 3-1/8" (80mm) deep and must be located
within solid concrete, not mortar or covering material. If you drill into an
area of concrete that is not solid, reposition mounting holes until both
anchors can be fully inserted into solid concrete!
WARNING:
13mm
Anchors that are not fully set in solid concrete will not support the
applied load resulting in an unstable, unsafe condition which could
lead to personal injury and/or property damage. Consult a construction
professional if you have any doubt about what this means in regard to
your particular situation.
2
13mm
0 - 5 lbs
(0 - 2.3 kg)
180°
7mm
13"
360°
180°
4x
7mm
4mm
3
www.ergotron.com
(330 mm)
80°

Publicidad

loading

Resumen de contenidos para Ergotron LX Wall Mount Keyboard Arm

  • Página 1 LX Wall Mount Keyboard Arm www.ergotron.com 0 - 5 lbs (0 - 2.3 kg) 1.125" (28.6mm) WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, un- safe condition which could lead to personal injury and/or property damage.
  • Página 2 Adjustment Follow these instructions to tighten or loosen tension. CAUTION: DO NOT overtighten fasteners. Overtightening may cause damage to your equipment. Ajuste Siga estas instrucciones para ajustar o afl ojar la tensión. Cuidado:: No sobreapriete los tornilllos, pues podría causar un daño al equipo. Suivez ces instructions pour desserrer ou resserrer la tension.