Publicidad
Idiomas disponibles
Idiomas disponibles
Side Strap Hooks:
Position remaining hooks at side mounting points from the Fit Sheet Notes.
LoAD FIRST BIkE.
mAkE SURE THE STRAP
IS FULLY ENgAgED.
1033600C – 5/21
TIgHTEN SIDE STRAPS.
Pull the straps
tighter with
two hands.
• Match the seat tube to the stabilizing cradle.
• Pull the rubber straps securely over the tubes.
TIgHTEN UPPER STRAPS.
Pull the straps tighter
with two hands.
Do not over tighten!
A Yakima TubeTop (see cover page) may be
required to carry your bike safely.
Failure to load bikes properly can result in
property damage, personal injury, or death.
Bikes should be as level as possible to avoid
ground clearance issues and possible ejections.
Publicidad
