Easy Home S570 Manual Del Usuaria página 5

Robotic Vacuum
Cleaning & Replacing Filter
To access the filter pull the release tab. (See Fig. 3)
1.
To remove the filter. (See Fig. 4)
2.
Clean the filter with hair dryer and dust brush. (See Fig. 5)
3.
Figure 3
Figure 5F
Figure 8F igure 9F
Cleaning of Large Main Brush
Clear the hair or dust particles on the main brush regularly, to improve it's clean-
1.
ing performance. Rotate the brush by hand and cut hair, yarn or any other twisted
objects with scissors (See Fig. 6).
8
service@801service.net
Operation and Maintenance
Figure 4
igure 6
igure 10
Figure 5
Large Main Brush
Figure 6
AFTER SALES SUPPORT
Robotic Vacuum
Cleaning of the Front Wheel
Pull out the front wheel with your finger or with a flat-head screwdriver and clean all
1.
debris from the wheel.
Insert and press the front wheel firmly back into position. (See Fig. 7)
2.
Cleaning the Ground Detection Sensor
The ground detection sensor is at the bottom of the vacuum.
1.
Clean the sensor with a cotton swab or soft cloth. (See Fig. 8)
2.
AFTER SALES SUPPORT
1 866 558 8096
1 866 558 8096
Operation and Maintenance
Figure 7
Figure 8
9
service@801service.net