Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVE THE PLUGS
IN THE MAST.
Pry off the plugs
using a flat tool.
Thread strap through loop
on bar.
ATTACH HOOK
TO WHEEL.
TO FOLD MAST DOWN AND ACCESS THE REAR:
Unload the bikes.
Slide the pin
Release the
out while
safety hook by
supporting the
pulling
mast.
outward on
the untethered
end.
ATTACH STABILIZING BAR.
Secure with washers, nuts
and bolts.
Use a wrench to tighten.
Repeat Step 24 and 25 for other end of strap.
Pull straps tight with both hands.
Don't forget to replace the pin
AND secure the safety hook.
ATTACH STRAP TO HOOK.
Attach hook to end of strap, threading
IN and OUT as noted on hook.
FOR FOUR BIKES:
Two straps are used in the bar loop
farthest from the vehicle.
LOCK CAN BE
MAINTENANCE
STORED:
Use non-water soluble lubricant
on moving metal parts.
When lock is not
in use, push it
Use a soft cloth with water and
completely into
mild detergent to clean plastic parts.
the lock-cap.
BEFORE DRIVING AWAY,
read cautions
on first page.
Publicidad
