FAAC TM ER Serie Guia De Inicio Rapido página 9

3.2
UNTIL IT ARRIVES IN THE DESIRED TRAVEL LIMIT DOWN POSITION. SIMULTANEOUSLY PRESS
OR
3.3
It is possible to reverse the time order of the travel limit setting sequence, starting from step 2 and
then performing step 1.
Press the button that controls ascent (
Press the stop/preferred position push-button for 2 seconds, release it for
1 second, and keep pressed again until the motor moves briefly in both
directions.

Press the button that controls descent (
Press the stop/preferred position push-button until the motor moves briefly

SETTING THE ROLLER SHUTTER TRAVEL LIMIT IN SEMI-AUTOMATIC MODE
CHECK WHICH KEY CONTROLS UP , AND KEEP IT PRESSED, WITHOUT RELEASING IT,
THE STOP/PREFERRED POSITION KEY TO CONFIRM THE POSITION UNTIL THE MOTOR
PERFORMS THE INDICATED MOVEMENTS
SETTING THE ROLLER SHUTTER TRAVEL LIMIT IN MANUAL MODE
STEPS TO PERFORM
TRAVEL LIMIT UP
TRAVEL LIMIT DOWN
and release the push-button.
in both directions.
TRAVEL LIMIT
DOWN
or ) , go to travel limit up.
+
X 1
CONFIRM
2 SECONDS
5 SECONDS
or ) ,go to travel limit down
CONFIRM
5 SECONDS

X 1
MOTOR RESPONSE
X 1
X 1