Replacing The Outer Foil And The Inner Blade; Replacing The File - Panasonic ES-EL8A Instrucciones De Operación

Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3. Rinse any debris thoroughly with water or lukewarm
water.
4. After turning the switch off, remove the frame and rinse
inside.
5. Wipe with a dry cloth and dry in a well‑ventilated
location.
Replacing the outer foil and the inner
blade
ES-EL8A
We recommend replacing the outer foil [
] every two years. Remove the outer foil
F
the inner blade [
of the shaver head [ F ] only when replacing it.
Replacing the outer foil
1. While pushing the outer foil gently with the fingers, use
a fingernail to release the plastic panel ( ) on the blade
from the hooks ( ) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed
in until it is hooked in the frame.
18
PB015825 - EL8A-3A _01EN_03-22-18.indd 18
Replacing the inner blade
1. Remove the inner blade by holding it
at both ends and pulling straight
away from the shaver.
2. Insert the inner blade by holding it at
both ends and press downward.

Replacing the file

The file lifetime is approximately 1 year (assuming a single
use every 2 weeks with approximately 10 minutes per use).
We recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
8] every year and
F
press down.
ES-EL8A
shaped part with the mark side and
2018/3/6 11:39:32