KlipXtreme DynamiK Guia De Instalacion página 5

5. On your mobile phone, tap the newly
discovered audio device (KSM-750)
displayed in the Bluetooth
6. When the mobile phone asks if you want to
pair with the earbuds, click YES or OK to
accept.
7. If you have a lower Bluetooth
may be prompted to enter the passkey 0000
(4 zeros).
8. If pairing is successful, the device will
generate a short tone. If after 60 seconds the
pairing process fails, please turn off the
headset and repeat steps 1 through 6
described above.
9. The earbuds will enter into standby mode
and will eventually turn off automatically after
five minutes if there is no Bluetooth
available for pairing.
Note: The earbuds will automatically pair to
the last known connected device in 3 seconds
after the earbuds are powered on.
®
list.
® version, you
®
device
V. Using the wireless earbuds in
hands-free mode
1. Answering and ending a call using your
mobile phone
• When there is an incoming call the LED
indicator will flash blue and an alert tone will
be heard through the earbuds. Briefly press
the multifunction button to pick it up. You
may also press the answer button on your
smartphone to take the call (music will be
paused).
• To end a call, simply press the multifunction
button once again. Likewise, you may also
finish the call directly using the end key on
your mobile (music will resume
automatically).
• To reject an incoming call, press the
multifunction button for about 1 second.
• If you want to redial the last number called,
press and hold the volume + and volume –
button at the same time for 1 second.