Basic Operation; Advanced Operation - KlipXtreme DynamiK Guia De Instalacion

III. Basic operation
Charge your earbuds
• Connect the Micro-USB end of the supplied
cable into the charging port of the earbuds
and the other end into the USB port of your
computer or to a 5VDC USB adapter to
charge the battery.
• Make sure that your earbuds are fully
charged before using them for the first time.
• The earbuds battery have to be initially
charged for at least 3 hours. Thereafter, the
battery will take around 2 hours to recharge.
• While the earbuds are being charged, the
LED light glows red. The status LED light
turns solid blue once it has reached full
capacity.
Turning your earbuds on and off
1. Press and hold the multifunction button. The
LED indicator will turn blue for 1 second.
2.To power off the device, press and briefly
hold the multifunction button. The LED
indicator will turn red and the earbuds will
turn off.
IV. Advanced operation
Note: Before using this product, please make
sure your device has the built-in Bluetooth
feature available.
Pairing the earbuds with your mobile
device
1. Place the earbuds and the mobile device not
more than one meter away from each other.
®
2. Set your Bluetooth
wireless earbuds.
3. Press and hold the multifunction button for
several seconds to turn the earbuds on.
4. The LED indicator will flash alternating
between blue and red, and the device will
automatically enter into the pairing mode.
®
phone to "discover" the