Operation; Before Use; Operation Overview - LG WM4500HA Serie El Manual Del Propietario

OPERATION

Before Use

WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before
operating this appliance.

Operation Overview

1
Sort laundry and load the washer.
• Sort laundry by fabric type, soil level, color and load size, as needed. Open the door and load items
into the washer.
• If using single-use detergent packs, place pack into the drum before loading the laundry.
2
Add cleaning products.
• Fill the larger ezDispense reservoir with HE (High-Efficiency) liquid detergent. Fill the smaller
reservoir with liquid fabric softener, if desired.
• Use the front detergent compartment of the manual dispenser for liquid or powdered detergent, or
oxygen-based bleach. Place liquid chlorine bleach ONLY in the bleach compartment at the back of
the manual dispenser.
3
Turn on the washer.
• Press the Power button to turn on the washer.
4
Select a cycle.
• Turn the cycle selector knob or press the cycle buttons repeatedly until the desired cycle is selected.
• The preset wash temperature, spin speed, soil level and option settings for the selected cycle are
shown.
• The Normal cycle must be selected in order to change its default settings.
• Pressing the Start/Pause button without selecting a cycle immediately starts the Normal cycle with
the default settings.
5
Adjust settings.
• Default settings for the selected cycle can be changed, if desired, using the cycle modifier and
option buttons.
• Not all modifiers and options are available on all cycles. A different chime sounds and the LED does
not light up if the selection is not allowed.
6
Begin cycle.
• Press the Start/Pause button to begin the cycle. The door locks, and the washer agitates briefly
without water to measure the weight of the load.
• If the Start/Pause button is not pressed within a certain time, the washer shuts off and all settings
are lost.
OPERATION 17